You are hereRefrigeration and freezing: Products & Services for Australia
Liebherr SmartMonitoring offers a comprehensive solution for documenting and monitoring measurement and operating data, alarm messages and appliance statuses. To connect the SmartCoolingHub required for this purpose to this appliance, you will need the RS 485 interface converter, which is available separately.
Alarm test function
This test function can be used to check whether an internally or externally connected alarm system is functioning correctly. The appliance’s refrigeration performance is not affected by this test.
Efficient refrigeration system
Liebherr guarantees the outstanding quality of its refrigeration systems through expertise derived from decades of experience in the refrigeration technology sector, and through continuous research and development. By employing only premium-quality compressors, condensers, evaporators and other refrigeration components the energy consumption and operating costs of Liebherr appliances are significantly reduced.
Premium-quality lid seal
Uniform closure of the freezer is guaranteed thanks to the flexible lid seal. It prevents cold air escaping from the appliance and so enhances its energy efficiency. The seal is made from a highly resilient, long-lasting material and its performance is unaffected by temperature fluctuations. It is easy to clean and extremely hygienic.
Serial bus interface
Appliances can be connected to an external monitoring system using the serial bus interface. If there is no monitoring system for connection via the interface, an interface converter retrofit kit is available as an optional accessory. This enables a connection to be made to a PC or a laptop. The bus interface allows up to 20 appliances to be connected in series and networked together. Temperature and alarm can therefore be documented and archived, e.g. via SmartMonitoring.
Temperature stability and consistency EN 60068-3
All laboratory refrigerators and freezers are tested at the state-of-the-art Liebherr development facilities according to procedure EN 60068-3 for measuring temperature stability. This involves measuring the temperature at nine different points in the appliance interiors.
Liebherr appliances are optimised for maximum energy efficiency and low operating costs. We only use the natural and environmentally-friendly refrigerants R 600a and R 290. When used with highly efficient compressors, these are extraordinarily efficient and, with their low global warming potential, also future-proof.
|Product group output channels||Laboratory chest freezer with Comfort electronic controller|
|Energy consumption per year||1,589 kWh/a|
|Net capacity, total||418 l|
|Freezer compartment||418 l|
|Cooling system, freezer compartment||static|
|Defrosting freezer compartment||manual|
|Voltage||220-240 V ~|
|Ambient temperature||+10 °C to 30 °C|
|Connection rating||3.5 A|
|Energy consumption in 24h||4.352 kWh / 24h|
|Product dimensions (H/W/D)||90.5 / 165.4 / 78.7 cm|
|Insulation||100 - 100 mm|
|Weight (with packaging)||91.00 kg|
|Weight (without packaging)||76.00 kg|
|Control||Electronic control system|
|Adjustable temperature range||-10 °C to -45 °C|
|Temperature display||external digital|
|Power failure alarm||when mains power returns|
|Maximum fluctuation||1.8 °C|
|Side wall material||steel|
|Cover frame colour||white|
|Type of lock||fitted|
|Material of interior containers||aluminium, white-coated|
|Type of castors||—|
Operating instructionsPDF (3.9 MB)
CE-CertificatePDF (272.4 KB)
Safety informationPDF (600.5 KB)
LTM Liebherr Temperature Monitoring Software ToolZIP (24.7 MB)
Please note: despite careful data management, we reserve the right to make technical changes; and discrepancies may occur between the image or text content and the original appliance.