You are hereRefrigeration and freezing: Products & Services for Indonesia
Liebherr SmartMonitoring offers a comprehensive solution for documenting and monitoring measurement and operating data, alarm messages and appliance statuses. The SmartCoolingHub required for this can be connected directly to this appliance via the pre-equipped RS 485 interface.
Alarm test function
This test function can be used to check whether an internally or externally connected alarm system is functioning correctly. The appliance’s refrigeration performance is not affected by this test.
Explosion protection: ATEX 95
The Atex 95 certification confirms that Liebherr laboratory fridges and freezers with explosion protection are appropriate for the storage of explosive and highly flammable materials within the meaning of EU Directive 2014/34/EU (ATEX).
Efficient refrigeration system
Liebherr guarantees the outstanding quality of its refrigeration systems through expertise derived from decades of experience in the refrigeration technology sector, and through continuous research and development. By employing only premium-quality compressors, condensers, evaporators and other refrigeration components the energy consumption and operating costs of Liebherr appliances are significantly reduced.
Serial bus interface
A serial bus interface can be used to connect appliances to an external monitoring system. If there is no monitoring system that can be connected via the interface available, an interface converter retrofitting kit (which connects with a PC or laptop) can be obtained as an optional accessory. The bus interface can be used to serially connect and network up to 20 appliances. Temperature and alarm details can be documented and archived using Liebherr's Temperature Monitoring software.
The integrated temperature alarm indicates if the lower or upper alarm thresholds have been breached. It uses both acoustic and visual signals to provide maximum security for goods that have been stored.
All laboratory refrigerators and freezers are tested at the state-of-the-art Liebherr development facilities according to procedure EN 60068-3 for measuring temperature stability. This involves measuring the temperature at nine different points in the appliance interiors.
Liebherr appliances are optimised for maximum energy efficiency and low operating costs. We only use the natural and environmentally-friendly refrigerants R 600a and R 290. When used with highly efficient compressors, these are extraordinarily efficient and, with their low global warming potential, also future-proof.
Several Liebherr models can be integrated underneath worktops, in which case a ventilation grille (200 cm² minimum) is required at the rear of the worktop to ensure sufficient aeration and ventilation of the appliance. In the absence of a ventilation grille in the worktop, the niche-height must be 860 mm, at the very least, to facilitate sufficient heat dissipation forwards. Under-worktop models offer a compact solution that is especially valuable in smaller work spaces.
Liebherr appliances are factory-fitted with door hinges on the right. The ability to change the hinge side allows the appliance to be tailored to individual requirements and optimally positioned.
|Product group output channels||Lab freezer with Comfort electronic controller|
|Energy consumption per year||294 kWh/a|
|Net capacity, total||129 l|
|Freezer compartment||129 l|
|Gross capacity, total||139 l|
|Total gross volume||139 l|
|Gross volume of the freezer compartment||139 l|
|Net volume of the freezer compartment||129 l|
|Total net volume||129 l|
|Cooling system, freezer compartment||static|
|Defrosting freezer compartment||manual|
|Voltage||220-240 V ~|
|Connection rating||1.0 A|
|Energy consumption in 24h||0.803 kWh / 24h|
|Product dimensions (H/W/D)||82 / 60.1 / 61.8 cm|
|Insulation||55 - 55 mm|
|Weight (with packaging)||43.00 kg|
|Weight (without packaging)||42.00 kg|
|Control||Electronic control system|
|Adjustable temperature range||-9°C to -26°C|
|Temperature display||external digital|
|Malfunction: Warning signal||optical and acoustical|
|Power failure alarm||when mains power returns|
|Maximum fluctuation||3.3 °C|
|SmartMonitoring||retrofittable, connectivity application available as option|
|Side wall material||steel|
|Type of lock||mechanical|
|Door hinges||Right reversible|
|Material of interior containers||Plastic white|
|Type of castors||—|
|Drawers in freezer compartment||3|
|Storage shelves freezer compartment||4|
|Shelf material||Evaporator plates|
|Load capacity adjustable shelves freezer compartment||24 kg|
|Handle||Ergonomic slimline handle with opening mechanism|
Operating instructionsPDF (4 MB)
CE-CertificatePDF (272.4 KB)
IQ/OQ-ReportPDF (308.7 KB)
LTM Liebherr Temperature Monitoring Software ToolZIP (24.7 MB)
Please note: despite careful data management, we reserve the right to make technical changes; and discrepancies may occur between the image or text content and the original appliance.