LGUex 1500 MediLine Lab freezer with Comfort electronic controller

Now you're ready for the guests to come – because your Liebherr is also in a party mood. PartyMode activates functions such as SuperCool and SuperFrost. After 24 hours, your Liebherr automatically returns to its normal mode.

ATEX 95 certification attests that Liebherr's explosion-proof laboratory refrigerators and freezers are suitable for the storage of explosive and highly flammable materials as defined by EU Directive 2014/34/EU (ATEX).

Liebherr guarantees the outstanding quality of its refrigeration systems through expertise derived from decades of experience in the refrigeration technology sector, and through continuous research and development. By employing only premium-quality compressors, condensers, evaporators and other refrigeration components the energy consumption and operating costs of Liebherr appliances are significantly reduced.

Appliances can be connected to an external monitoring system using the serial bus interface. If there is no monitoring system for connection via the interface, an interface converter retrofit kit is available as an optional accessory. This enables a connection to be made to a PC or a laptop. The bus interface allows up to 20 appliances to be connected in series and networked together. Temperature and alarm can therefore be documented and archived, e.g. via SmartMonitoring.

The integrated temperature alarm indicates if the lower or upper alarm thresholds have been breached. It uses both acoustic and visual signals to provide maximum security for goods that have been stored.

All laboratory refrigerators and freezers are tested at the state-of-the-art Liebherr development facilities according to procedure EN 60068-3 for measuring temperature stability. This involves measuring the temperature at nine different points in the appliance interiors.

Liebherr appliances are optimised for maximum energy efficiency and low operating costs. We only use the natural and environmentally-friendly refrigerants R 600a and R 290. When used with highly efficient compressors, these are extraordinarily efficient and, with their low global warming potential, also future-proof.

Several Liebherr models can be integrated underneath worktops, in which case a ventilation grille (200 cm² minimum) is required at the rear of the worktop to ensure sufficient aeration and ventilation of the appliance. In the absence of a ventilation grille in the worktop, the niche-height must be 860 mm, at the very least, to facilitate sufficient heat dissipation forwards. Under-worktop models offer a compact solution that is especially valuable in smaller work spaces.

Liebherr appliances are factory-fitted with door hinges on the right. The ability to change the hinge side allows the appliance to be tailored to individual requirements and optimally positioned.