You are hereRefrigeration and freezing: Products & Services for Malaysia
Liebherr SmartMonitoring offers a comprehensive solution for documenting and monitoring measurement and operating data, alarm messages and appliance statuses. The SmartCoolingHub required for this can be connected directly to this appliance via the pre-equipped RS 485 interface.
Alarm test function
This test function can be used to check whether an internally or externally connected alarm system is functioning correctly. The appliance’s refrigeration performance is not affected by this test.
Explosion protection: ATEX 95
The Atex 95 certification confirms that Liebherr laboratory fridges and freezers with explosion protection are appropriate for the storage of explosive and highly flammable materials within the meaning of EU Directive 2014/34/EU (ATEX).
Digital temperature display
The digital temperature display indicates the refrigerator’s interior temperature to the exact degree. This can be easily read from the outside to give users immediate information and without the need to open the appliance.
Forced air cooling
Highly efficient fans cool freshly stored produce quickly and maintain an even refrigeration temperature throughout the interior.
Efficient refrigeration system
Liebherr guarantees the outstanding quality of its refrigeration systems through expertise derived from decades of experience in the refrigeration technology sector, and through continuous research and development. By employing only premium-quality compressors, condensers, evaporators and other refrigeration components the energy consumption and operating costs of Liebherr appliances are significantly reduced.
A serial bus interface can be used to connect appliances to an external monitoring system. If there is no monitoring system that can be connected via the interface available, an interface converter retrofitting kit (which connects with a PC or laptop) can be obtained as an optional accessory. The bus interface can be used to serially connect and network up to 20 appliances. Temperature and alarm details can be documented and archived using Liebherr's Temperature Monitoring software.
The integrated temperature alarm indicates if the lower or upper alarm thresholds have been breached. It uses both acoustic and visual signals to provide maximum security for goods that have been stored.
All laboratory refrigerators and freezers are tested at the state-of-the-art Liebherr development facilities according to procedure EN 60068-3 for measuring temperature stability. This involves measuring the temperature at nine different points in the appliance interiors.
Liebherr appliances are optimised for maximum energy efficiency and low operating costs. We only use the natural and environmentally-friendly refrigerants R 600a and R 290. When used with highly efficient compressors, these are extraordinarily efficient and, with their low global warming potential, also future-proof.
Liebherr appliances are factory-fitted with door hinges on the right. The ability to change the hinge side allows the appliance to be tailored to individual requirements and optimally positioned.
|Product group output channels||Lab refrigerator with Comfort electronic controller|
|Energy consumption per year||316 kWh/a|
|Net capacity, total||344 l|
|Refrigerator compartment||344 l|
|Gross capacity, total||360 l|
|Refrigerator compartment||360 l|
|Total gross volume||360 l|
|Gross volume of the fridge compartment||360 l|
|Total net volume||344 l|
|Nettovolumen Kühlteil||344 l|
|Cooling system, refrigerator compartment||dynamic|
|Defrosting cooling compartment||automatic|
|Voltage||220-240 V ~|
|Connection rating||1.5 A|
|Load-bearing capacity of shelf areas, refrigerator compartment||40 kg|
|Energy consumption in 24h||0.865 kWh / 24h|
|Product dimensions (H/W/D)||184 / 60.1 / 61.8 cm|
|Insulation||40 - 40 mm|
|Weight (with packaging)||73 kg|
|Weight (without packaging)||68.00 kg|
|Control||Electronic control system|
|Temperature range refrigerator compartment||+3°C to +16°C|
|Temperature display||external digital|
|Malfunction: Warning signal||optical and acoustical|
|Power failure alarm||when mains power returns|
|Maximum fluctuation||5.1 °C|
|SmartMonitoring||retrofittable, connectivity application available as option|
|Side wall material||steel|
|Type of lock||fitted|
|Door hinges||Right reversible|
|Material of interior containers||Plastic white|
|Type of castors||—|
|Storage shelves, refrigerator compartment||6|
|of which height-adjustable||5|
|Storage shelf material, refrigerator compartment||Glass|
|Illumination cooling compartment||—|
|Handle||Ergonomic slimline handle with opening mechanism|
Operating instructionsPDF (3.9 MB)
CE-CertificatePDF (272.4 KB)
IQ/OQ-ReportPDF (308.7 KB)
LTM Liebherr Temperature Monitoring Software ToolZIP (24.7 MB)
Please note: despite careful data management, we reserve the right to make technical changes; and discrepancies may occur between the image or text content and the original appliance.